Ravin Steel Broadheads are 100-grain mechanical heads made for fast crossbows. Their design is simple. A one-piece 416 steel ferrule holds rear-deploying blades that open on impact.
The broadhead has a 2-inch cutting diameter. An internal spring clip holds the blades closed in flight, so there are no lock rings or O-rings to manage. That makes setup simple, but good arrow inspection and practice still matter.
Ravin Steel Broadhead Specs
- 100-grain mechanical broadhead
- 416 steel construction
- Single-piece ferrule
- Rear-deploying blades
- 2-inch cutting diameter
- Internal spring clip
- No lock ring or O-ring
- Sold as a three-pack
Those are the key details listed by Ravin Crossbows. Ravin also says the heads have been tested and approved for its crossbows up to 500 FPS.
Check Compatibility Before You Hunt
This point is easy to miss. Ravin says these Steel Broadheads are not compatible with the Ravin LR or R29X. If you own either bow, do not assume a Ravin-branded head is safe for it. Our Ravin LR review and Ravin R29X review cover those models in more detail.
Compatibility matters with arrows too. Use the arrow and nock type listed in your crossbow manual. Before each session, inspect the shaft, nock, vanes, insert, and broadhead. Replace damaged gear instead of trying to squeeze one more hunt from it.
How the Mechanical Design Works
The blades stay tucked in during flight. On impact, they deploy to make the full 2-inch cut. The internal spring clip removes the need for a loose collar or rubber ring.
That does not mean you can skip practice. A broadhead can hit a little differently from a field point. Shoot the exact hunting setup into a target made for broadheads. Start close. Confirm the point of impact before moving back.
A Simple Setup Routine
- Read the manual for your exact crossbow model.
- Inspect the arrow and nock for cracks or other damage.
- Thread the broadhead fully into the insert.
- Check that the blades are closed and secure.
- Spin the finished arrow and look for tip wobble.
- Confirm impact on a broadhead-rated target.
An arrow spinner can make the last check quick. A small wobble may point to a loose head, bad insert, or damaged arrow.
Practice Before the Season
Use field points for most practice, then confirm your hunting arrows with broadheads. A crossbow broadhead target gives you a safe place to make those final checks.
Keep the practice simple. Shoot a cold first arrow. Then shoot a few calm groups at realistic ranges. Our beginner deer hunting guide also covers shot choice, tracking, and the habits that matter more than raw speed.
Field Use and Shot Choice
A wide mechanical head is not a reason to force a poor shot. Wait for a clear path and an angle you have practiced. Know the distance and what is beyond the animal. If the shot does not feel right, let it pass.
Good field use also starts before you reach the stand. Walking, balance, and steady movement help on rough ground. The simple advice in this guide to listening to your body and staying safe applies well to long days outdoors too.
Care After Practice or a Hunt
Clean and dry the broadhead after use. Look closely at the ferrule and blades. Make sure the blades move as designed and still close securely. Do not hunt with a bent, dull, loose, or damaged head.
A broadhead storage case can protect sharp edges in your pack. It also keeps exposed heads away from fingers and other gear.
Who These Broadheads Fit
Ravin Steel Broadheads make sense for a hunter who wants a 100-grain mechanical head with a simple blade-retention system and a wide cut. The steel ferrule also gives the head a solid, straightforward build.
The biggest caution is model fit. Check Ravin’s current compatibility notes before buying or hunting with them. Once the head matches the bow, careful inspection and real broadhead practice are still the best path to confidence in the field.