The Ravin Aluminum Broadhead is a simple mechanical head made for Ravin crossbows. It uses rear-deploying blades and a light aluminum body. The design keeps small loose parts to a minimum.
For hunters, the main appeal is easy to see. It weighs 100 grains, opens on impact, and makes a 2-inch cut. Good setup and careful shot choice still matter more than any broadhead.
Ravin Aluminum Broadhead Specs
Ravin lists the R102 Aluminum Broadhead as a three-pack. It uses a 7075-T6 aluminum body with a steel tip. The blades deploy from the rear when they hit. An internal spring clip holds the blades in place, so there are no lock rings or O-rings to install.
- Weight: 100 grains
- Cutting diameter: 2 inches
- Blade style: rear-deploying mechanical
- Body: 7075-T6 aluminum
- Tip: steel
- Retention: internal spring clip
- Ravin tested and approved: up to 500 FPS
You can check the current specifications on the official Ravin Aluminum Broadheads page. That is also the best place to check for later product changes.
Why the Design Is Useful
A mechanical head keeps its blades tucked in during flight. This gives it a small profile. The blades then open on impact. That can help the arrow fly much like the field point used during practice.
The internal clip is another useful detail. There are no small bands to fit before a hunt. That makes the head quick to inspect and simple to carry.
If you are comparing complete setups, our Ravin R26X review covers a compact 400 FPS hunting crossbow. Our Ravin R500 review looks at the much faster 500 FPS platform.
Set Up the Arrow First
Start with the arrow approved for your exact crossbow. Check the shaft, nock, vanes, and insert. Do not shoot a cracked or damaged carbon arrow. Screw the broadhead in fully, then spin the finished arrow. A wobbling tip is a warning sign.
A simple arrow spinner can make this check easier. A protective broadhead case can also keep sharp heads covered while they are in your pack. These are affiliate links, so we may earn a commission from qualifying purchases at no extra cost to you.
Confirm Broadhead Impact Before Hunting
Do not assume a hunting arrow will hit in the same place as a field point. Test the broadhead at a safe range with a target made for broadheads. Start close. Move back only after the point of impact is clear and repeatable.
Keep the arrow weight and setup consistent. Small changes can move impact. Our Ravin Titanium Broadheads review is useful if you want to compare this aluminum head with Ravin’s titanium option.
Field Use and Shot Choice
A broadside or mild quartering-away angle gives a hunter a clear path to the vital area. Wait for a calm shot. Know the distance. Do not let a wide cutting diameter tempt you into taking a poor angle.
Fitness also helps on long days outdoors. Even simple trail miles can build steady legs and balance. The Lincolnshire Wolds trail loops show how varied off-road routes can build time on your feet.
Care After Practice or a Hunt
Inspect the broadhead after each use. Look for bent blades, damage to the tip, or a body that no longer spins true. Keep it clean and dry. Replace a damaged head rather than trusting it on the next hunt.
Also check local hunting rules before using an expanding broadhead. Laws can differ by state, season, and game species.
Is the Ravin Aluminum Broadhead a Good Fit?
The R102 keeps the design simple. It gives you a 100-grain head, a 2-inch cut, rear-deploying blades, and no external retention rings. It is also tested by Ravin for its crossbows up to 500 FPS.
That makes it a practical choice for a compatible Ravin setup. Test it with your own arrows before hunting, keep every part in good shape, and let good shot placement do the most important work.